New Features in 24.3.0.82

Device OS Support
This release adds support for the following device operating systems:
  • ExtremeXOS/Switch Engine:
    • 32.6.3 Image Download Support
    • 32.6.3 Onboard, Monitor, Config, Image Drag & Drop Support
    • 31.7.3 Patch 1-X Image Download Support
    • 31.7.3 Patch 1-X Onboard, Monitor, Config, Image Drag & Drop Support
    • EXOS iqagent 0.8.3 – Switch Engine supports IQagent 0.8.3
  • VOSS/Fabric Engine:

    VOSS iqagent 0.8.3 – Fabric Engine now supports IQagent 0.8.3

    IQ Engine 10.6.7

New Hardware Support
There is no new hardware support in this release.
Table 1. New Features in 24.3.0.82
Feature ID Feature Description
XIQ-14048 Dynamic Packet Capture Dynamic Packet Capture is available on the AP5010 and AP3000. Client association, authentication, and networking issues are captured and available in ExtremeCloud‌ IQ.
XIQ-15047 Support Switch Engine Route Monitor Refresh Action On demand refresh of the Switch Engine IPv4 Routing Table is now supported. You can now selectively refresh to update the IPv4 Route Monitoring Table in Manage > Device > Monitor > Routing. When the refresh icon next to the Last Polled time is pressed, the latest IPv4 Routing Table information is populated. Switch Engine software version 32.6.2 or greater is required to be running on the device.
XIQ-16477 6GHZ Scanning support for 6E APs 6Ghz Scanning on all 6E Sensors is now supported.
XIQ-17518 Allow Changing Port Type settings when LAG is applied for ExtremeXOS/Switch Engine ExtremeCloud IQ now supports changing Switch Engine LAG port types after a port has been assigned to a LAG. With this feature, you can change port type configurations within a switch template without the requirement to delete and recreate a LAG. Software version 32.5 or greater is required to be running on the device.
XIQ-20469 Support Switch Engine Onboard, Monitor, and Config for model 4120 in ExtremeCloud‌ IQ ExtremeCloud‌ IQ now supports model 4120 and 4220 SKUs for onboarding, monitoring, and configuration. Software version 32.7.1 or greater must be running on the device.
XIQ-20479 Support Switching Traffic Health Monitor

Additional diagnostics monitoring is now supported for Switch Engine port congestion packet drops, port Utilization RX, port Utilization TX, and QoS statistics. Go to Manage > Device > Monitor > Diagnostics.

The QoS Statistics tab in Diagnostics supports the display of QoS packets and QoS packet congestion for selectable QoS profiles 1 through 8. Software version 32.7.1 or greater is required to be running on the device.

XIQ-20527 Enhance Clone Feature to add Config Bundle for ExtremeXOS/Switch Engine

The Switch Engine Clone device action from Manage > Devices now supports the ability to perform a full configuration clone. This option includes configurations previously performed through supplemental CLI, SSH proxy, or local console saved on the original device.

If the device becomes unresponsive after the clone and reboot process, the device will reboot to the previous configuration.
Note: If stacking-support is disabled for a device, you must perform a device update after the clone configuration process is complete. The stacking-support mode change requires an additional reboot.
XIQ-20538 Deprecate 60 Days Grace Period for Universal Switches The 60 days grace period specific for Universal series switches is deprecated from the ExtremeCloud‌ IQ
XIQ-21217 Support for IQE 10.6.7 Added support for IQ Engine 10.6.7.
XIQ-21409 Add Support for VLAN Probe to ExtremeXOS/Switch Engine ExtremeCloud‌ IQ now supports the VLAN probe feature for a Switch Engine device from Manage > Device > Utilities > Tools > Switch VLAN Probe, or from the Topology Map. The VLAN probe function utilizes the DHCP client on the Switch to check for and display IP connectivity on a specified VLAN. If the VLAN selected to perform a VLAN probe already has a static IP address or DHCP already enabled, ExtremeCloud‌ IQ skips the VLAN probe for that specific VLAN.
XIQ-21648 6G channel support for radio-share mode AP3000 now supports radio-share mode on WiFi0 when configured for 6Ghz.
XIQ-22342 Indoor Placement support in ExtremeCloud IQ User Interface AP5050U/D is configurable in ExtremeCloud IQ for indoor use. Configuration options are for 2.4 GHz and 5 GHz. 6 GHz remains disabled.
XIQ-22443 ARP suppression to protect wireless access interface & Enhanced Proxy Arp A new Proxy ARP Sliderbar is available in Management Options to set different ARP traffic handling capabilities across four available settings.
XIQ-22530 Ability to delete orphaned devices managed by ExtremeCloud IQ Site Engine Administrators can delete devices in undermined state managed by ExtremeCloud IQ Site Engine in Connected state to solve inconsistent state.
XIQ-22693 Switching Report

ExtremeCloud‌ IQ now supports the ability to run a switch summary report for Switch Engine devices. Generate the report from Manage > Reports > Switch Summary Report.

The report generates a list of port errors, port operational status, and port TX/RX information.

XIQ-23522 Thread Topology Visualization Thread network visualization is available when configuring and deploying a Thread (IoT) network through ExtremeCloud‌ IQ.
XIQ-23635 Support 4120 Switch Engine Universal Port Mode/Channelization ExtremeCloud‌ IQ now supports model 4120 Switch Template and device level configurations to allow the universal port mode to be changed from stacking-support to non stacking-support. When non-stacking support is selected, the universal ports can also be channelized. Changes to the universal port mode requires a reboot when a device update is performed with universal port mode stacking-support or channelization speed changes.
XIQ-24592 Add Unassigned Location to Filter Administrators can now filter devices by Location > Unassigned. This enhancement makes it easier to locate these devices and assign locations to them. This feature also removes the need to assign the location during device on-boarding.
XIQ-25312 DHCP Snooping for dynamic VLANs The DHCP snooping feature in Network Policy > Common Settings for Switch Engine, template configuration and device level configuration now supports enabling DHCP snooping on VLANs that are dynamically created.
XIQ-25439 Ability to view Instant Port Device Type on Device Level Port Left Click Switch Engine now supports the ability to view Instant Port Device Type information on the left-click menu. Go to Manage > Monitor > Overview > Port Status.
XIQ-25706 Digital Twin - Support for SwitchEngine 32.6.3 only CoPilot Digital Twin supports Switch Engine OS version 32.6.3 and later. Support for OS version 32.4.1.10 has been deprecated.
XIQ-25814 ExtremeXOS/Switch Engine 32.7.1 Manufacturing Image Onboard, Monitor, Config (Drag/Drop) Support ExtremeCloud‌ IQ now supports ExtremeXOS/Switch Engine version 32.7.1 for onboarding, monitoring, and configuration support.
XIQ-27145 Support Route Monitor Polling Graph for Switch Engine ExtremeCloud‌ IQ now supports historical route monitoring with graphical views for Switch Engine. Go to Manage > Device > Monitor > Routing. Select the time range (day, week, month, or custom) to display static, direct, OSPF, and total IPv4 based routes with the time graph. Software version 32.6.2 or greater is required to be running on the device.
XIQ-27306 Update AVC Signature to the latest version IQ Engine Application Visibility & Control (AVC) signature file is updated.
XIQ-27306 Add Ecuador for AP510C and AP460S6C AP510C and AP460S6C are now supported in Ecuador.
XIQ-27806 VOSS/Fabric Engine 9.0.2 Onboarding, Monitoring, Configuration, and Download Image Support ExtremeCloud‌ IQ now supports VOSS/Fabric Engine 9.0.2 image downloads for all supported VOSS/Fabric Engine SKUs.
XIQ-27837 Wireless PoE Stability v2 - LLDP enabled CoPilot anomaly detection is enhanced to include LLDP. When CoPilot detects an anomaly, it includes information about the upstream LLDP switch and other anomalous APs connected to the same switch.
XIQ-27838 Wireless PoE Stability v2 - LLDP disabled CoPilot anomaly detection is enhanced to include LLDP. When CoPilot detects an anomaly, it includes information about the upstream LLDP switch and other anomalous APs connected to the same switch.
XIQ-28763 Add Ecuador for AP510C and AP460S6C AP510C and AP460S6C are now supported in Ecuador.
XIQ-28858 Add indoor channels for Indonesia 149 - 161 for AP510C and AP5010 Indoor channels for Indonesia 149 - 161, for AP510C and AP5010, are now added.
XIQ-9753 Ability to add all supported VOSS/EXOS/Universal switches as Manage Locally VOSS and EXOS devices can be onboarded as managed locally
XESS-1421 Manual Classification Manual Classification to Sanction or un-sanction APs, has been added to Extreme AirDefense Essentials.